|
In order to cut down the amount of spam messages on this forum, you must be registered to start a new thread or post to an existing thread. If you already have an account, click here to login. Click here to read our privacy policy.
Click on the discussion forum icon in your control panel to start a new thread or post to an existing thread. Back to Topics lha
2009-10-28 07:32:05 | Check points;adjust to .015 on each lobe[in other words they may not all be the same] also adjust timing [if you don't have a manual,you should get one].Then adjust your carb.,large high speed main jet 2 turns out from shut.idle should be started about 1turn out and adjusted in or out for fastest idle,then adjust idle [screw on motor side]for slow,450 rpms.hope that helps---lha
| john tucker
2009-10-28 01:09:35 | I have a 9n with a rebuilt carb, new wiring,rebuilt govenor and no power. the compression is good. It will idle but comes up to speed slow under no load. Under load it will not move the tractor. Can anybody help?
|
Back to Topics
|
